Bixolon STP-131 Instrukcja Użytkownika

User’s Manual STP-131 Thermal Printer Rev. 1.06 http://www.bixolon.com

Rev. 1.06 - 10 -STP-1312-2 Connecting the Interface Cables You need an appropriate interface cable. Interface Connector (Serial or Parallel) -

Rev. 1.06 - 11 -STP-1312-2-1 STP-131S Serial Interface Pin No. Signal name Direction Function FG. - Frame Ground 20 TxD Output Transmit Data

Rev. 1.06 - 12 -STP-1312-2-2 STP-131P Parallel Interface PRINTER HOST 1 /STROBE(I/O) 1 /STROBE(I/O) 2 DATA0(I/O) 2 DATA0(I/O) 3 DATA1(I/O) 3 DA

Rev. 1.06 - 13 -STP-1312-3 Connecting the Drawer Drawer Kick-out Connector ※ WARNING Use a drawer that matches the printer specification. Using

Rev. 1.06 - 14 -STP-1313. Setting the Dip Switches 12 3456789LONKONKSDOBH12 3456789LONKONKSDOBHS/W : 1S/W : 2 Dip Switch 1 No. Level BPS S/W1 S/

Rev. 1.06 - 15 -STP-1314. Roll Paper Installation NOTE※ Be sure to use paper rolls that specifications. Do not use paper rolls that have the paper

Rev. 1.06 - 16 -STP-1314-5 Be sure to note the correct direction that the paper comes off the roll. 4-6 Close the cover. NOTE※ When closing t

Rev. 1.06 - 17 -STP-1315. Self Test The self-test checks whether the printer has any problems. If the printer does not function properly, contact yo

Rev. 1.06 - 18 -STP-1316. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer. This can be u

Rev. 1.06 - 19 -STP-1317. Specification Printing method Thermal line printing Dot density 180 X 180 dpi (7dots/mm) Printing width 72 mm Paper wid

Rev. 1.06 - 2 - STP-131 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any haz

Rev. 1.06 - 3 - STP-131 CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the printe

Rev. 1.06 - 4 - STP-131 Warning - U.S.A This equipment has been tasted and found to comply with the limits for a Class A digital device, pursuant to

Rev. 1.06 - 5 - STP-131 Caution Some semiconductor devices are easily damaged by static electricity. You should turn the printer "OFF", b

Rev. 1.06 - 6 - STP-131 Table of Contents 1. Setting Up the Printer ...

Rev. 1.06 - 7 - STP-1311. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missing, pl

Rev. 1.06 - 8 - STP-1311-2 Functions POWERERRORFEED FEED Button Press the FEED button once to advance paper one line. You can also hold down the

Rev. 1.06 - 9 - STP-1312. Connecting the cables NOTE※ Before connecting any of the cables, make sure that both the printer and the host are turned